Stukas and Stringbags

Now that I've got quite a few ships done, I thought it was time to add some aircraft. The aircraft in Ghukek's Wargaming 3d catalog are FREE!, which is cool. They are scaled at 1:900 to go with the 1:1800 ships. He does the smaller fighters and carrier aircraft as singles and flights of three, joined at the tails or with overlapping wings. Large bombers, scout planes etc are all singles. 

Some he modeled with tiny propellers, which are weird. I cut them off where present.

Picture from Ghukek catalog of Bristol Beaufighters. Note individual model and flight of three model

The flights of three is how the Mad Padre printed my aircraft for the 1:2400 project a couple of years back.

Dauntless SBDs (joined wing tip to tail) and F4F Hellcats (joined at the wing tips) fly over a CVE early in the project.

It was easy enough to paint them. Clip off the peg on the post, glue the flight on, brush prime and paint.

Except, due to some casual storage, my flights of aircraft have taken some damage. Flights of three reduced to two, or even one, model with shortened wings.

The SBDs (far left and far right) if you look closely are in rather poor shape.

Don printed me the single models, not the flights. So I had six of each aircraft. These were going to be a bugger to paint and how to base them? And after all that effort, how to keep them from breakage? So solutions needed to be found.

For painting I hit on the idea to superglue them to some sprue. Easy to just pop them off the plastic, right? RIGHT???!!

Painting in progress

Wrong. A lot of wings and tails snapped as I tried to gently pop them off the sprue, even after I put a bunch in the freezer for 24 hours.

Carnage!

Some I was able to repair, because the breaks were simple, clean, and I could find the errant piece.

But many airframes were a complete write off. 2 out of 5 Do17s survived. I managed to repair the damaged Ju88s, so I got all six in service. Of the Me110s and Ju87s I only saved half, 3 each. The rest were unsalvageable.

Do17s attacking HMS Cleopatra off Crete

Two flights of Ju88s make a bombing run

Swordfish from HMS Illustrious attack the Armando Diaz off North Africa

For the British I only lost one each of the Swordfish and the Beaufighters, so I made a flight of three and a flight of two for each.

The British have 4 flights of attack aircraft. The Axis have five flights. One of Me110 fighters, two of Ju88s, and one each of Do17s and Ju87s. The Axis will have to wait until I get some Italian aircraft before they get torpedo bombers.

Me110s

For the flights of three, I cut a triangle of clear plastic from a food packaging clam shell and punched a hole behind where the lead aircraft would go. Flights of two got a rectangle with a hole punched in the center.

The aircraft were then hot glued into position. I left some overlap so the plastic would protect the wings.

Ju87 Stukas!

Beaufighters attacking a convoy in the North Sea, or maybe the Mediterranean.

I think with the next round of aircraft I'll hot glue the models to a popsicle stick, or a wooden skewer. They might be easier to pop free from the hot glue. Painting the bottoms isn't really needed. You don't see them.

The bases wobble a bit on the stands, but they come free to lay flat for storage. The angles also add a bit of drama to the scene as well, and helps you imagine attacking aircraft swooping around, dodging flak, as they pounce on their target.